Table of Contents
Advertisement
10
1,3,5,7,9
2,4,6,8
Fons eT
29
PHESS
MENU
TO
RETURN
Setting the Date and Time
If you select the [DATE/TIME SETUP] Sub-Menu of the
[CAMERA FUNCTIONS] Main-Menu, the menu shown above
appears.
The initial setting of date and time is 0:00, 1st January, 2000.
For example: To set the clock to 15th October 2000,
14:30.
1 Turn the [A V} Dial to set to [2000].
The years change in the following order:
- 1990...1991...2000,..2089...1990...
Press the [SET] Button to select [MONTH].
Turn the [A V] Dial to set to [10].
Press the [SET] Button to select [DATE].
Turn the [A ¥] Dial to set to [15].
Press the [SET] Button to select [HOUR].
Turn the [A ¥] Dial to set to [14].
Press the [SET] Button to select [MIN.}.
Turn the [A V] Dial to set to [30].
COMO
ON
OO
BO
ND
ah
Press the [MENU] Button to finish the date
and time setting.
The operation of the clock starts from (00] seconds.
Pressing the button one more time makes
the menu disappear.
elf you select the [DATE/TIME SETUP] Sub-Menu when the
button-type battery is not inserted into the Movie Camera or
is exhausted, the Main-Menu disappears and the [(&]
Indication flashes instead. Insert a new button-type battery
(> 28) and then set the date and time again.
@As the Movie Camera's built-in clock is subject to slight
imprecision, be sure to check the indicated time before
recording.
The clock employs the 24-hour system.
Advertisement
Table of Contents
