Using The [Setup] Menu; [World Time]/[Travel Date]/[Beep]; [Volume]/[Lcd Mode]/ [Display Size] - Panasonic Lumix DMC-FT10 Operating Instructions Manual

Using the [SETUP] menu

For details about the setting procedure in the [SETUP] menu. (→32)
Make general camera settings such as adjusting the Clock, extending the battery life, and
changing the Beep sounds.
[CLOCK SET], [AUTO REVIEW] and [AUTO POWER OFF] are important for Clock
setting and battery life. Please check these before use.
Item
The precautions that should be checked in advance to
[PRECAUTIONS]
maintain the waterproof performance are displayed.
Display the precautions
• If the waterproof precautions are not read to the end once after
for preventing water from purchasing the camera, they are displayed every time the power
is turned on. If [MENU/SET] is pressed at the final screen (11/11),
entering the camera.(→9)
the precautions are not displayed from the next time you turn on
the power. To check the precautions again, display it from this
menu.
Set time, date, and display format.
[CLOCK SET]
Set the date and time.
(→30)
[DESTINATION]: Set the local time at travel destination.
[WORLD TIME]
[HOME]: Set date and time at home area.
Set the local time at
travel destination. (→72)
[TRAVEL SETUP]
[TRAVEL DATE]
[OFF]/[SET] (Register departure and return dates.)
Record the number of
days elapsed in your
[LOCATION]
travels. (→71)
[OFF]/[SET] (Input name of destination.) (→80)
[BEEP LEVEL]
[BEEP]
/
Change or mute the
beep/shutter sounds.
[BEEP TONE]
/
[SHUTTER VOL.]
/
[SHUTTER TONE]
/
36
VQT2X62
Settings, Notes
/ : Mute/Low/High
/ : Change beep tone.
/ : Mute/Low/High
/ : Change shutter tone.
For details about the setting procedure in the [SETUP] menu. (→32)
Item
0 • • [LEVEL3] • • [LEVEL6]
[VOLUME]
• Cannot be used to adjust TV speaker volume when
Adjust volume of sound
connected to TV. (We recommend setting camera
from speakers (7 levels).
volume to 0)
[OFF]: Normal (cancel setting)
[LCD MODE]
[AUTO POWER LCD]:
Make LCD monitor easier
The brightness is adjusted automatically depending on
to see.
how bright it is around the camera.
[POWER LCD]:
Makes screen brighter than normal (for outdoor use).
[HIGH ANGLE]:
Makes screen easier to see when taking pictures from
high positions (becomes harder to see from the front).
• [AUTO POWER LCD] is disabled in the following situations.
During Playback Mode or menu screen display, or when
connected to computer/printer.
• [POWER LCD] will be deactivated if no operations are performed
for 30 seconds while recording. (Brightness can be restored by
pressing any button)
• [HIGH ANGLE] will be cancelled when power is turned off or
when [AUTO POWER OFF] is activated.
• Because the picture shown on the LCD monitor screen
emphasizes brightness, some subjects may look different than
their actual appearance, but this will not affect the recorded
picture.
• Block out sunlight (with hand, etc.) if reflection makes screen
difficult to see.
• [AUTO POWER LCD] and [HIGH ANGLE] are not available in
Playback Mode.
• Selecting [AUTO POWER LCD] or [POWER LCD] will reduce the
number of pictures available and battery life.
[STANDARD]/[LARGE]
[DISPLAY SIZE]
Change the display size
of the menu.
Settings, Notes
37
VQT2X62