One-Shot Recording (One-Shot Rec) - Panasonic AG-HPX500 Operating Instructions Manual

2
Select INTERVAL in the REC FUNCTION
item in the menu option RECORDING
SETUP screen.
3
Set the time in the INTERVAL TIME item
in the menu option RECORDING SETUP
screen.
4
Press the REC START/STOP button.
• The camera will repeat 1-frame recording for
the time interval set in the INTERVAL TIME
item.
• Press the STOP button to stop recording.
• To cancel this function, turn the camera off or
select NORMAL in the REC FUNCTION item.
• The following indications appear to the left of
the operation status display.
• During recording: "I-REC" stays lit.
• During a pause: "I-PAUSE" stays lit.
When a setting of less than 2 seconds is
made in step 3, "I-REC" blinks according to
time setting during recording.
• When stopped:"I-" in "I-PAUSE" blinks.
<Note>
• The pre-recording function is not available.
• Sound is not recorded.
• Data recorded (until the STOP button is
pressed) in this mode is recorded as a single
file.
• The 1394 connector does not output any
signals.
• This function is not available if a DIR ENTRY NG
CARD is inserted.
• A card inserted during recording is recognized
after recording stops. Insert a card after the
recording ends.
One-shot recording (ONE-
SHOT REC)
This function records a single shot at each unit of time
which has been set.
1
Check that the OPERATION TYPE item
in the menu option SCENE FILE screen
and REC FORMAT item in the menu
option RECORDING SETUP screen are
set as described below.
For details on menu operation, refer to [Using
the menus] (page 116).
• OPERATION TYPE item:
VIDEO CAM
• Recording format:
They are available at 1080i/60i (50i),
1080i/30P (25P), 720P/60P (50P), 720P/30P
(25P), or in SD at 60i (50i), 30P (25P).
2
Select ONE SHOT in the REC
FUNCTION item in the menu option
RECORDING SETUP screen.
3
Set the time in the ONE SHOT TIME
item in the menu option RECORDING
SETUP screen.
4
Press the REC START/STOP button.
• The camera will pause recording after making
a recording that lasts the duration set in step
3.
• Press the STOP button to stop recording.
• To cancel this function, turn the camera off or
select NORMAL in the REC FUNCTION item.
• The following indications appear to the left of
the operation status display.
• During recording: "I-REC" stays lit.
• During a pause: "I-PAUSE" stays lit.
• When stopped:"I-" in "I-PAUSE" blinks.
<Note>
• No other functions are available during
operation.
• The pre-recording function is not available.
• Sound is not recorded.
• Data recorded (until the STOP button is
pressed) in this mode is recorded as a single
file.
• The 1394 connector does not output any
signals.
• This function is not available if a DIR ENTRY NG
CARD is inserted.
• During continuous one-shot recording,
recording operation speed may be decreased.
• A card inserted during recording is recognized
after recording stops. Insert a card after the
recording ends.
41
Special Recording Modes