Output Sel Screen; Display Setup Screen - Panasonic AG-HPX500 Operating Instructions Manual

Item
F.MIC POWER2
Turns on and off the phantom power supply for the front microphone connected to CH2.
●ON, OFF
R.MIC POWER
Turns on and off the phantom power supply for the rear microphone.
●ON, OFF
F.MIC CH1 LEVEL
Selects the input level for the front microphone connected to CH1.
●–40 dB, –50 dB, –60 dB
F.MIC CH2 LEVEL
Selects the input level for the front microphone connected to CH2.
●–40 dB, –50 dB, –60 dB
R.MIC CH1 LEVEL
Selects the input level for the rear microphone connected to CH1.
●–50 dB, –60 dB
R.MIC CH2 LEVEL
Selects the input level for the rear microphone connected to CH2.
●–50 dB, –60 dB
Sets the headroom (standard level).
HEADROOM
●59.94Hz System: 18 dB, 20 dB
●50 Hz System: 18 dB, 20 dB
Switches speaker and earphone audio delay.
MONITOR MODE
●LIVE: No audio delay
●RECORDING: Recorded (delayed) audio

OUTPUT SEL screen

Item
Selects D or SDI connector.
CMPNT/SDI SEL
●59.94Hz system: AUTO, 1080i, 480i
●50 Hz system: AUTO, 1080i, 576i
/
If this item is set to AUTO, the REC FORMAT setting will be applied.
SDI METADATA
Turns on and off metadata superimposition onto the SDI signal.
●ON, OFF
/
SDI EDH
Turns on and off EDH superimposition onto the SD-SDI signal.
●ON, OFF
/
Selects whether to delay time code output.
TC VIDEO SYNCRO
●TC IN: Outputs the input from the TC IN connector without delay.
●VIDEO: Outputs the time code with delay according to the output video.

DISPLAY SETUP screen

Item
ZEBRA DETECT
Selects the brightness level of the leftleaning zebra patterns on the screen.
●50 %, 55 %, 60 %, 65 %, 70 %, 75 %, 80 %, 85 %, 90 %, 95 %, 100 %, 105 %
Turns on or off the center marker display.
MARKER
●ON, OFF
Set this item to ON to display the marker. The brightness status is also displayed.
SAFETY ZONE
Sets SAFETY ZONE.
●OFF, 90 %, 4:3
Sets whether to display the date and time on the screen and whether to output from the VIDEO IN/OUT
jack.
DATE/TIME
●OFF: The date and time are not displayed.
●TIME: The time is displayed.
/
●DATE: The date is displayed.
●TIME&DATE: The time and date are displayed.
LEVEL METER
Select ON to display the audio level meter.
●ON, OFF
/
Turns zoom value display on and off.
ZOOM
●ON, OFF
Displays zoom values between Z00 to Z99.
CARD/BATT
Turns on and off card and battery remaining level.
●ON, OFF
/
Switches the indication of remaining P2 memory card capacity.
P2CARD REMAIN
●TOTAL: Indicates total remaining capacity of all cards.
/
●ONE-CARD: Indicates the remaining capacity of the card that is being recorded.
Description of settings (Items in bold are factory settings.)
Description of settings (Items in bold are factory settings.)
Description of settings (Items in bold are factory settings.)
125
Setup menu list