Adjusting And Setting The Lcd Monitor - Panasonic AG-HPX500 Operating Instructions Manual

Adjusting and setting the LCD monitor

Using the LCD Monitor
1
Turn on the POWER switch of the AG-
HPX500P/E.
2
Slide the OPEN button in the arrow ➀
direction to open the LCD monitor.
<Note>
The LCD monitor opens to an angle of 120
degrees. Attempts to open it further will damage
the monitor.
3
Adjust the angle of the LCD monitor for
most convenient viewing.
• The monitor can turn up to 180 degrees
towards the lens and up to 90 degrees
towards you.
<Note>
To prevent camera-recorder failure, do not allow
undue force to be applied to the monitor (when it
is open).
4
Use the menu option LCD SET
(DISPLAY SETUP) to adjust the
brightness, color level and contrast of
the screen.
For details on menu operation, refer to [Using
the menus] (page 116).
• At LCD SET of the DISPLAY SETUP screen,
select YES.
1
5
Use the JOG dial button to select an
item.
6
Press the JOG dial button, and turn the
JOG dial button to adjust the selected
item.
DISPLAY SETUP
OTHER DISPLAY
LCD BACKLIGHT
LCD SET
SELF SHOOT
DOWNCON MODE
DISPLAY ASPECT
MENU BACK
PUSH MENU TO RETURN
LCD SET
LCD COLOR LEVEL
[ ]
LCD BRIGHTNESS
[ ]
LCD CONTRAST
[ ]
PUSH MENU TO RETURN
LCD SET
LCD COLOR LEVEL
[ ]
LCD BRIGHTNESS
[ ]
LCD CONTRAST
[ ]
PUSH MENU TO RETURN
Adjusting and setting the LCD monitor
PARTIAL
NORMAL
YES
S-CROP
AUTO
ON
[+]
[+]
[+]
[+]
[+]
[+]
75