Using The Audio Settings - Onkyo TX-SR507 Instruction Manual

Advanced Setup—Continued

Using the Audio Settings

You can change various audio settings by pressing the [AUDIO] button.
Tone Control Settings
You can adjust the bass and treble for the front speakers, except when the Direct or Pure Audio listening mode is
selected.
Notes:
• To bypass the bass and treble tone circuits, select the Direct or Pure Audio listening mode.
• This procedure can also be performed on the AV receiver by using its [TONE], [–], and [+] buttons.
Bass
Treble
Late Night Function
With the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear
quiet parts even when listening at low volume levels—ideal for watching movies late at night when you don't want
to disturb anyone.
Late Night
Notes:
• The effect of the Late Night function depends on the material that you are playing and the intention of the original
sound designer, and with some material there will be little or no effect when you select the different options.
• The Late Night function can be used only when the input source is Dolby Digital, Dolby Digital Plus, or Dolby
TrueHD.
• The Late Night function is set to Off when the AV receiver is set to Standby. For Dolby TrueHD sources, it will be
set to Auto.
78
RECEIVER
AUDIO
–10dB to +10dB in 2dB steps (default: 0dB)
–10dB to +10dB in 2dB steps (default: 0dB)
For Dolby Digital and Dolby Digital Plus sources, the options are:
Off: Late Night function off (default).
Low: Small reduction in dynamic range.
High: Large reduction in dynamic range.
For Dolby TrueHD sources, the options are:
Auto: The Late Night function is set to "On" or "Off" automatically (default).
Off: Late Night function off.
On: Late Night function on.
1
Press the [RECEIVER] button followed by
the [AUDIO] button.
2 Use the Up and Down [ ]/[ ] buttons to
select an item.
3
Use the Left and Right [ ]/[ ] buttons to
change the setting.
Repeat this step for the other settings.