Using The Late Night Function (Dolby Digital Only); Using The Cinemafilter; Using The Audio Adjust Settings; Cine Fltr Button - Onkyo TX-SR505 Instruction Manual

Using the Listening Modes —Continued
STANDBY/ON
INPUT SELECTOR
1 2
V CR/DVR CBL/SAT
4 5
AUX MULTI CH
7 8
TAPE TUNER
10
+ 10
0
D TUN
--/--- DIMMER
TV VOL
INPUT
GUIDE
TOP MENU
SP A / B
ENTER
PLAYLIST/CAT
SETUP
SETUP
LISTENING MODE
STEREO SURROUND
AUDIO SUBTITLE
TEST TONE CH SEL
PLAY MODE
DISPLAY
VCR
Using the Late Night Function
(Dolby Digital only)
With the Late Night function, you can reduce the
dynamic range of Dolby Digital material so that you can
still hear quiet parts even when listening at low volume
levels—ideal for watching movies late at night when you
don't want to disturb anyone.
1
Press the [RECEIVER] REMOTE
MODE button, and then press the

RECEIVER

[L NIGHT] button repeatedly to
select:
Off: Late Night function off.
L NIGHT
Low: Small reduction in dynamic
High: Big reduction in dynamic
Notes:
• The effect of the Late Night function depends on the
Dolby Digital material that you are playing, and with
some material there will be little or no effect.
• The Late Night function is set to Off when the AV
receiver is set to Standby.
52
REMOTE MODE
RECEIVER
RECEIVER DVD
TAPE/AMP
M D/CDR
C D
3
DOCK
TV
6
DVD
VCR
9
C D
CABLE
11 12
CLR SAT
ENT
SLEEP
CH
VOL
DISC
ALBUM
PREVIOUS
MENU
MUTING
ENTER
PLAYLIST/CAT
RETURN
RANDOM REPEAT
LEVEL - LEVEL +
L NIGHT CINE FLTR CINE FLTR
DVD HDD
L NIGHT
681 M
RC-
range.
range.

Using the CinemaFILTER

With the CinemaFILTER, you can soften overly bright
movie soundtracks, which are typically mixed for repro-
duction in a movie theater.
CinemaFILTER can be used with the following listening
modes: Dolby Digital, Dolby Digital EX, PLII/IIx
Movie, DTS, DTS-ES, DTS Neo:6 Cinema, DTS 96/24,
Dolby/DTS+PLIIx Movie, Dolby/DTS+Neo:6, and
DTS+Dolby EX.
1 Press the [RECEIVER] REMOTE
MODE button, and then press the
RECEIVER
[CINE FLTR] button repeatedly to
select:
On: CinemaFILTER on.
CINE FLTR
Off: CinemaFILTER off.

Using the Audio Adjust Settings

The Audio Adjust settings only affect speaker set A.
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
RECEIVER
SETUP
2
Use the Up and Down [ ]/[ ]
buttons to select "Audio Adjust,"
and then press [ENTER].
3
Use the Left and Right [
buttons to change the setting.
Press the Down [ ] button to
select the next setting.
Repeat this step for the other settings.
]/[ ]