Saving Settings; Error Message - Olympus SP-565 Instruction Manual

Saving settings

"Settings are not saved after the power is
turned off"
●
When mode dial is set to P, A, S, M or A:
settings will be saved even if the power is turned
off (except for self-timer, [PANORAMA] and
[TIMELAPSE]).
● When mode dial is set to h or s :
settings will be changed back to default when the
power is turned off (except for
[DIMAGE QUALITY]).

Error message

When one of the messages below is
displayed on the LCD monitor, check the
following.
Error message
q
Card problem
Insert a new card.
CARD ERROR
q
Card problem
Use a computer to cancel the
WRITE
read-only setting.
PROTECT
Internal memory problem
>
• Insert a card.
MEMORY FULL
• Erase unwanted images.
Card problem
q
• Replace the card.
CARD FULL
• Erase unwanted images.
Card problem
Use 78 to select [CLEAN
•
CARD], and press the
o button. Take out the card,
CARD SETUP
wipe the contact area (p. 78)
with a soft, dry cloth, and then
CLEAN CARD
load the card again.
FORMAT
Use 78 to select
•
SET OK
[FORMAT], and press the
o button. Next, use 78
to select [YES], and press the
o button.
Internal memory problem
MEMORY SETUP
IN
Use 78 to select [MEMORY
FORMAT], and press the
o button. Next, use 78
POWER OFF
MEMORY FORMAT
to select [YES], and press the
SET OK
o button.
Recording has
stopped to allow
camera to cool.
Please wait a
Operation problem
moment.
Allow the camera to cool down
before you begin shooting again.
Camera is
cooling.
Please wait a
moment.
Corrective action
*1
*1
*2
*2
Internal memory/Card problem
L
Take pictures before viewing
NO PICTURE
them.
Problem with selected image
Use photo retouch software,
r
etc. to view the image on a
PICTURE
computer. If the image still
ERROR
cannot be viewed, the image fi le
is corrupted.
r
Problem with selected image
THE IMAGE
Use photo retouch software, etc.
CANNOT
to edit the image on a computer.
BE EDITED
Operation problem
Close the card cover.
CARD-COVER
OPEN
Battery problem
g
• Insert new batteries.
BATTERY
• If using rechargeable batteries,
EMPTY
charge the batteries.
Connection problem
Connect the camera and
NO
computer or printer correctly.
CONNECTION
Printer problem
Load paper into the printer.
NO PAPER
Printer problem
Refi ll the ink in the printer.
NO INK
Printer problem
Remove the jammed paper.
JAMMED
Printer problem
SETTINGS
Return to the status where the
CHANGED
*3
printer can be used.
Printer problem
Turn off the camera and
printer, check the printer for
any problems and then turn the
PRINT ERROR
power on again.
r
Problem with selected image
CANNOT PRINT Use a computer to print.
*4
*1 Before erasing important images, download them to
a computer.
All data will be erased.
*2
This is displayed, for instance, when the printer's
*3
paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.
This camera may be unable to print images taken by
*4
other cameras.
EN 73