Table of Contents
Advertisement
Adjusting the flash intensity [ w ]
K CAMERA MENU
In certain situations, it is advisable to adjust the fl ash intensity, such as when shooting small subjects
or distant backgrounds. This function is also used when increased contrast is desired.
Submenu 2
−2.0 to +2.0
Using an external flash [ Q FLASH]
K CAMERA MENU
Submenu 2
IN
#RC
SLAVE
"Taking pictures with the Olympus Wireless RC Flash System" (p. 80)
When set to [SLAVE], the fl ash setting automatically changes to [# FILL IN] (p. 23).
When set to [SLAVE], the fl ash can fi re when [DRIVE] (p. 34) is set to a setting other than [o], but if
the fl ash intensity is large, the interval between sequential shots becomes longer.
38 EN
w
Adjust the fl ash intensity for the shooting scene.
Q FLASH
Submenu 3
—
The built-in fl ash is used for taking pictures.
An Olympus Wireless RC Flash System compatible fl ash is
CH1 to CH4
used for taking pictures. The channel (CH1 to CH4) can be
selected.
The commercially-available slave fl ash that is synchronized
1 to 10
with the camera fl ash is used for taking pictures. The fl ash
intensity setting can be adjusted.
Application
Application
: P A S M r s
: P A S M r s
Advertisement
Table of Contents
