Table of Contents
Advertisement
Using the alarm [ALARM CLOCK]
x SETUP
ALARM CLOCK
When [X] has not been set, [ALARM CLOCK] is not available.
When [DUALTIME] (p. 59) is set to [ON], the alarm is activated at the date and time set in
[DUALTIME].
Submenu 2
OFF
TIME
SNOOZE
ONE TIME
SOUND TYPE
VOLUME
(Submenus 3 and 4 can be set in the
DAILY
same way as [ONE TIME].)
*1
The setting procedure is identical to that in "Setting the date and time" (p. 12)
In this setting, even if the alarm is stopped once, the alarm will be activated every 5 minutes, up to 7 times.
*2
To check the alarm time, press the g button while the camera is turned off. The current and
alarm set times are displayed for approx. 3 seconds.
To activate the alarm
After making the detailed settings of
[ONE TIME] or [DAILY], press the o
button to turn off the camera.
Selecting a video signal system to match your TV [VIDEO OUT]
x SETUP
VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV's video signal type.
Submenu 2
NTSC
Connecting the camera to a TV in North America, Taiwan, Korea, Japan, etc.
PAL
Connecting the camera to a TV in European countries, China, etc.
The factory default settings differ according to the region where the camera is sold.
60 EN
Submenu 3
Submenu 4
—
—
(Proceeds to the
setting screen
*2
OFF/ON
1/2/3
LOW/HIGH
Application
The alarm is canceled.
.)
*1
The alarm is activated once according to the time,
the sound type and the volume settings that are
made here.
The alarm is activated daily at the same settings.
To stop the alarm
When the alarm is activated, press any button
to shut off the alarm and turn off the camera.
When [SNOOZE] is set to [OFF], the alarm
stops automatically and the camera turns off
after 1 minute of no operation.
Application
Advertisement
Table of Contents
