Setting the startup display screen and sound [PW ON SETUP]
x SETUP
PW ON SETUP
Submenu 2
SCREEN
VOLUME
*2
This image cannot be changed.
*1
*2
When [SCREEN] is set to [OFF], this setting is not available.
To register a startup image
1 Select [2] in submenu 3 for [SCREEN].
2 Use 9: to select the image to be registered, and press the o button.
Selecting the menu screen color [MENU COLOR]
x SETUP
MENU COLOR
Submenu 2
NORMAL/COLOR 1/
COLOR 2/COLOR 3
Selecting the camera sound and its volume [SOUND SETTINGS]
x SETUP
SOUND SETTINGS
In [j SILENT MODE] (p. 63) all sounds can be set to be turned off.
Submenu 2
BEEP
SHUTTER SOUND
8
q VOLUME
56 EN
Submenu 3
OFF
No image is displayed.
1
A preset image
A still image stored in the internal memory or card is registered for
2
display. (This option leads to the setup screen.)
OFF(No sound)/
The volume of the startup sound is selected.
LOW/HIGH
Selects the menu screen color according to your preference.
Submenu 3
Submenu 4
SOUND TYPE
1/2
OFF (No sound)/
VOLUME
LOW/HIGH
SOUND TYPE
1/2/3
OFF (No sound)/
VOLUME
LOW/HIGH
OFF (No sound)/
LOW/HIGH
5 levels excluding
OFF (No sound)
Application
*1
is displayed.
Application
Selects the operating sound and volume of the
camera buttons (except the shutter button).
Selects the operating sound and volume of the
shutter button.
—
Selects the warning sound volume.
—
Adjusts the image playback volume.
Application