Registering a set of shooting settings under my mode labels [MY MODE SETUP]
x SETUP
MY MODE SETUP
By referring to the "Application" column, select the registration method (submenu 2) and the desired
my mode label (submenu 3) and then adjust any settings.
Submenu 2
CURRENT
s MY MODE 1/
E MY MODE 2/
RESET
c MY MODE 3/
d MY MODE 4
CUSTOM
When [CUSTOM] is selected, available function settings for the my mode registrations are follows;
•
[P/A/S/M/f] (p. 17 to 20)
•
[F] (p. 23)
•
[FNo.] (p. 17, 18)
•
[SHUTTER] (p. 17, 18)
•
[FLASH MODE] (p. 22)
•
[&] (p. 24)
•
[Y] (p. 24)
•
[f] (p. 22)
•
[MONITOR]
•
[ZOOM]
•
[IMAGE QUALITY] (p. 31)
•
[WB] (p. 32)
•
[ISO] (p. 33)
To select the display device used at
camera startup [MONITOR]
Select [CUSTOM] (submenu 2)
my mode label (submenu 3)
(submenu 4), and then the display device
that shows the saved image or shooting
standby screen ([LCD] or [EVF]).
To select the zoom position at camera
startup [ZOOM]
Select [CUSTOM] (submenu 2)
my mode label (submenu 3)
(submenu 4), and then a preset focal length
(angle of view) ([26mm], [50mm], [150mm],
[300mm] or [520mm]).
The focal length selected by [ZOOM] is
based on the equivalent value for 35mm
cameras.
62 EN
Submenu 3
Submenu 4
SET/CANCEL
RESET/CANCEL
(Register functions
individually)
•
[DRIVE] (p. 34)
•
[FINE ZOOM] (p. 35)
•
[DIGITAL ZOOM] (p. 35)
•
[METERING] (p. 35)
•
[AF MODE] (p. 36)
•
[FOCUS MODE] (p.36)
•
[FULLTIME AF] (p. 37)
•
[AF PREDICT] (p. 37)
•
[AF ILLUMINAT.] (p. 37)
•
[IMAGE STABILIZER] (p. 37)
•
[ w ] (p. 38)
•
[ Q FLASH] (p. 38)
•
[ R ] (p. 39)
desired
[MONITOR]
desired
[ZOOM]
Application
[SET] sets the current menu function settings to the
selected my mode label (s/E/c/d).
[RESET] returns the functions in the selected my
mode label to their defaults.
The user can make any changes to a selected my
mode label setting.
•
[ > ] (p. 39)
•
[PICTURE MODE] (p. 39)
•
[SHARPNESS] (p. 39)
•
[CONTRAST] (p. 40)
•
[SATURATION] (p. 40)
•
[NOISE REDUCT.] (p. 40)
•
[TIMELAPSE] (p. 41)
•
[ 1 ] (p. 41)
•
[INFO] (p. 25)
•
[FRAME ASSIST] (p. 61)
•
[ u ] (p. 61)
To select the information display at
camera startup [INFO]
Select [CUSTOM] (submenu 2)
my mode label (submenu 3)
(submenu 4), and then the desired
information display format at camera
startup ([OFF] (startup the camera with no
information), [ON] (startup the camera with
normal display), [FRAME ASSIST] (startup
the camera with grid) or [u] (startup the
camera with histogram)). "Changing the
shooting information display" (p. 25)
desired
[INFO]