Startup/Shutdown Screen; If The Card Is Not Recognized (Card Check) - Olympus CAMEDIA C-5060 Wide Zoom Reference Manual

Startup/Shutdown screen

You can select a picture and sound so that when
the power is turned on/off, a startup/shutdown
image is displayed on the monitor and the
startup/shutdown sound is played (P.188). You
can register a picture for the startup/shutdown
screen (P.189) and adjust the volume of the
sound (P.187).

If the card is not recognized (card check)

When the power is turned on, the camera checks the card automatically. If
there is no card in the camera or a card that is not supported by this camera
is inserted, the following screen is displayed.
Control panel
• All data stored on the card is erased when the card is formatted.
Note
Startup/Shutdown screen (Factory default setting)
Monitor
indication
There is no card in the camera or the card is
not inserted properly.
→ Insert a card. If a card is already inserted,
NO CARD
The card cannot record, play back or erase
pictures.
Replace the card. with a new one or format
the card.
→ Press ac to select POWER OFF, then
CARD%SEtUP
POWER%OFF
→ Format the card.
FORMAt
SELECt GO
Turning the power on/off
Corrective action
remove it and insert it again correctly.
press e. Replace the card with a new
one.
Press ac to select I FORMAT, then
press e to display the confirmation
screen. Select YES and press e.
Formatting starts. If the card was
successfully formatted, the camera is
ready to take pictures.
1
35