At More Than One Point - Olympus CAMEDIA C-5060 Wide Zoom Reference Manual

• Turning the camera off or changing the shooting mode will return
the metering target to the center position.
Note
Multi-metering
– Metering the exposure at more than one point
Mode dial
1
Turn the control dial while holding
down 4 and select MULTI3.
• MULTI 3 is displayed on the control
panel.
2
Position the AF target mark on the
area you want to meter and press
the AEL (AE Lock) button. The
brightness is metered at up to 8
different points.
• The multi-metering bar appears on the
monitor.
• Brightness meter readings are ignored after the 8th reading.
• To perform metering again, press the AEL button for more than 1
second to display C. Press the AEL button again to cancel the
metering values.
Metering
Metering button
Control dial
AEL button
99
5