Startup/Shutdown Screen; If The Card Is Not Recognized (Card Check) - Olympus C-765 Ultra Zoom Quick Start Manual

Startup/Shutdown screen

This image is displayed on the monitor each
time the camera is turned on or off. You can
also use your favorite image (P.152).

If the card is not recognized (card check)

When the power is turned on, the camera checks the card automatically. If
there is no card in the camera or a card that is not supported by this camera
is inserted, the following screen is displayed.
Monitor indication
q
NO CARD
CARD%SEtUP
POWER%OFF
FORMAt
SELECt GO
FORMAt
CAUtION ERASING%ALL
YES
NO
SELECt GO
All data stored on the card is erased when the card is formatted.
Note
Corrective action
There is no card in the camera or the card is not
inserted properly.
Insert a card. If a card is already inserted,
remove it and insert it again correctly.
The card cannot record, play back or erase
pictures. Format the card or replace it with a new
one.
Press ac to select POWER OFF, then press
e. Replace the card with a new one.
Format the card.
Press ac to select I FORMAT, then press
e to display the confirmation screen. Select
YES and press e.
Formatting starts. If the card was successfully
formatted, the camera is ready to take pictures.
Power on/off
Startup/Shutdown screen
(Factory default setting)
1
25