Exposure compensation
In some situations, you may get better results when the exposure that the
camera sets is compensated (adjusted) manually. You can adjust the
exposure by selecting the exposure compensation value. After adjusting the
exposure, you can check the picture on the monitor.
Mode dial
1
Turn the control dial while
holding down F.
• Adjust toward + Turn to the right to
• Adjust toward - Turn to the left to
• The exposure compensation can be
set in 1/3EV steps or 1/2EV steps.
g"Exposure steps – Selecting the
adjustment increments" (P.174)
• The exposure compensation value is
displayed on the control panel.
6
126
adjust up to +2.0.
adjust up to -2.0.
2.0
F Exposure compensation
button
0.0
Control dial
2.0