Olympus CAMEDIA C-5060 Wide Zoom Reference Manual page 230

(Playback of recorded images
Possible cause
The picture is out of focus.
A subject unsuited to
AF was taken
The camera moved
when the shutter
button was pressed.
The flash was set to
the flash off mode in
a lighting condition
requiring use of the
flash.
The lens was dirty.
The picture is too bright.
The flash was set to
the fill-in flash mode.
The center of the
subject is too dark.
The ISO is at a high
setting.
The aperture value is
small in A (M) mode.
The shutter speed
setting is too slow in
S (M) mode.
Corrective action
Use manual focus or focus lock to focus on the
subject and then shoot.
Hold the camera correctly and press the shutter
button gently.
Select a flash mode other than flash off. Camera
movement occurs easily with slower shutter
speeds. Use a tripod, or set the flash to AUTO.
Clean the lens. Use a commercially available
blower blush and then wipe with a lens cleaner to
remove dust. Mold may form on the lens surface
if the lens is left dirty.
Select a flash mode other than fill-in flash.
If the center of the subject is too dark, the
surrounding area emerges as too bright. Adjust
the exposure compensation toward minus (–).
Set the ISO to AUTO or to a low sensitivity: 80.
Increase the aperture value. Or set the camera to
P mode.
Increase the shutter speed or set the camera to P
mode.
Troubleshooting
Ref. Page
P.68, 95
P.41
P.74
P.244
P.74
P.126
P.125
P.86
P.87
11
229