Changing the startup screen and shutdown
screen (PW ON SETUP/PW OFF SETUP)
You can select the picture displayed and the sound played when the
camera is turned on and turned off. You can also register your favorite
picture and display it on the screen. g"Screen setup" (P. 101)
Top menu
[PW OFF SETUP]
1
For [SCREEN], select [OFF], [1],
[2], or [3], and press Z.
OFF
1
2
3
2
For [SOUND], select [OFF], [1], or
6
[2], and press Z.
OFF
1/2
• The volume level is the same as that set
with [VOLUME].
g"Setting camera sounds (8/BEEP/
SHUTTER SOUND/VOLUME)" (P. 103)
3
Press Z.
Note
• You can only set [PW ON SETUP] for the [3] of the [SCREEN].
100
[MODE MENU]
[SETUP]
No picture is displayed.
A picture is displayed.
The picture registered with
[SCREEN SETUP] is displayed.
If there is no registered picture,
nothing is displayed.
The sample pictures in the
camera are displayed.
No sound.
Sound is omitted.
[PW ON SETUP]/
g"Using the menus" (P. 19)
PW ON SETUP
SCREEN
SOUND
SELECT
PW ON SETUP
SCREEN
SOUND
SELECT
OFF
1
2
3
OK
GO
OFF
1
2
GO
OK