Bay Networks 2000 Installation Manual page 97

Appendix A Configuring the NetManage ChameleonNFS IP Stack (16-bit)
Protocol IPX 0 Ethernet_802.3
Protocol IP 800 ETHERNET_II
Protocol RARP 8035 ETHERNET_II
Protocol ARP 806 ETHERNET_II
Frame Ethernet_802.3
Frame Ethernet_II
Frame ETHERNET_802.2
Frame ETHERNET_SNAP
For a Token Ring network adapter card, the net.cfg file should
contain entries like these:
Link Support
Buffers 14 4096
Mempool 4096
Link Driver drivername (for example, TOKENODI)
int 5
port 300
Protocol IPX E0 TOKEN-RING
Protocol IP 800 TOKEN-RING_SNAP
Protocol RARP 8035 TOKEN-RING_SNAP
Protocol ARP 806 TOKEN-RING_SNAP
Frame TOKEN-RING_SNAP
Frame TOKEN-RING
4. Edit the startnet.bat file to include the following lines or add
these lines to the autoexec.bat file before the Path lines:
For an Ethernet network adapter card, this file should contain entries
like these:
cd \nwclient
lsl
drivernameodi.com (for example, exp16odi.com)
ipxodi
c:\Q2CAnnex\comm\nmodi /b8
netx (or vlm, depending on the version of Novell software you are running)
Installing Remote Annex Network Software for Windows
A-3