Bay Networks 2000 Installation Manual page 111

Sample System Files
I
f you chose not to have Quick2Config Annex Setup modify your system
files during installation, you must modify the system files yourself before
you run Quick2Config Annex with the communications stack. This
appendix provides examples of the changes you need to make.
The example files contain the modifications you must make to each of
the following system files:
• autoexec.bat
• win.ini
We recommend that you enter the changes to the system files at the end
of each file, with one exception. In the autoexec.bat file, make sure you
enter the new lines before the
executes before the
PATH
Quick2Config Annex.)
Reboot your computer after you make the required changes to your
system files.
The sample system files reside in the Example directory under your
installation directory. Remember that these are examples. If you changed
the default location of Quick2Config Annex when you installed it, modify
your system files accordingly.
Installing Remote Annex Network Software for Windows
Modifying System Files
WIN command. (If the
and commands, you cannot start
SHARE
Appendix B
WIN command
B-1