MSI 915G Neo3-FIR User Manual page 88

M S-7166 ATX M ainboard
3. In the Disk field, press <Enter> key and the following screen appears. Use
<Space> key to select the disks you want to create for the RAID volume, then
click <Enter> key to finish selection.
4. Then select the strip value for the RAID 0 or RAID 1 array by using the "upper
arrow" or "down arrow" keys to scroll through the available values, and
pressing the <Enter> key to select and advance to the next field. The avail-
able values range from 4KB to 128 KB in power of 2 increments. The strip
value should be chosen based on the planned drive usage. Here are some
suggested selections:
16 KB – Best for sequential transfers
64 KB – Good general purpose strip size
128 KB – Best performance for most desktops and workstations. The default
value.
5. Then select the capacity of the volume in the Capacity field. The default
value is the maximum volume capacity of the selected disks.
5 - 4