Appendix
Testing the Connected Speakers
To ensure that 4- or 6-channel audio operation works properly, you may
need to test each connected speaker to make sure every speaker work properly.
If any speaker fails to sound, then check whether the cable is inserted firmly
to the connector or replace the bad speakers with good ones.
Testing Each Speaker:
1. Click the audio icon
of the screen.
2. Click the Speaker Test tab.
3. The following window appears. Select the speaker which you want to
test by clicking it.
Front Left
Rear Left
from the window tray at the lower-right corner
Center
Note:
6 speakers appear on the "Speaker Test" window only
when you select "6-Channel Mode" in the "No. of Speak-
ers" column. If you select "4-Channel Mode", only 4
speakers appear on the window.
A-14
Subwoofer
Front Right
Rear Right