MSI 648 Max User Manual page 65

Chapter 3
Wake Up On PME#, Resume on PS2 Mouse From S3
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected. Settings: Enabled, Disabled.
PS2 MOUSE Wake Select Mode
When Resume on PS2 Mouse From S3 is set to Enabled, you may use
this item to specify the PS2 mouse wake-up mode. Settings: Click &
Move, Click.
Keyboard PowerOn Function From S3
The item specify how the system will be awakened from power saving
mode when input signal of the keyboard is detected. If set to Specific
Key, <Ctrl+Alt+BackSpace> is the only one Power On event. If set to
Password, please press <Enter> to input password and its maximum
password is 5 character. Setting: Disabled, Any Key, Sepcific Key and
Password.
USB Wakeup From S1/S3
This item allows the activity of the USB device to wake up the system
from S3 (Suspend to RAM) sleep state. Settings: Enabled, Disabled.
Resume By Alarm
This is used to enable or disable the feature of booting up the system on
a scheduled time/date from the soft off (S5) state. Settings: Enabled,
Disabled.
RTC Alarm Date/Hour/Minute/Second
If Resume By Alarm is set to Enabled, the system will automatically
resume (boot up) on a specific date/hour/minute/second specified in
these fields. Available settings for each item are:
Alarm Date
Alarm Hour
Alarm Minute
Alarm Second
Note: If you change these settings, you must reboot the system until it
enters the operating system and then power off the system. By doing
so, the changed settings will come into effect next time you power on
the system.
01 ~ 31, Every Day
00 ~ 23
00 ~ 59
00 ~ 59
3-18