Lexicon RV-8 User Manual page 192

Appendix C
Using Preprogrammed Codes
To program the remote to make it compatible with other com-
ponents:
1. Manually power on the device to be operated.
2. Go to the SETUP mode by pressing both the HOME and ENT
buttons simultaneously for three seconds until SETUP appears
at the top of the LCD screen.
3. Press the P-PRO button next to the LCD screen.
4. The remote will be flashing "SELECT BUTTON" at the bottom
of the LCD screen. Press the button for the device you wish to
program. For example, to program a TV, press the TV button.
5. The remote will be flashing "FROM TABLE" at the bottom of
the LCD screen. Select the device from which to access the
code table.
Note:
When using the Preprogramming method, always
use the appropriate button as shown in the column
when asked "FROM TABLE." The labels of the buttons
may have been changed, but the codes are in the
positons as shown to the left. For example, the
AUDIO Code table will always be the top left but-
ton.The CD Code table will always be the fourth but-
ton down on the right side of the LCD screen, etc.
Note:
Use DVD2, not DVD1, to access the DVD code
library. DVD1 has been preprogrammed to control
the Lexicon RT-10 Disc Player.
6. The remote will be flashing "ENTER NUMBER." Refer to the
tables starting on page C-18 and find the manufacturer/brand
of your device. (If programming the remote for the TV device,
find the TV's device code table, and so on.)
7. Point the remote control toward the device and enter the first
three-digit code number selected for your device. There is no
way of knowing which code is the one that will have the func-
tions that more closely match your device than the others, so
it is wise to try them all. See step 9 on the next page. (Enter
the code number within 20 seconds of beginning the
programming; otherwise the remote will revert to the SETUP
menu, and then after a period of time, it will go back to the
MAIN device page.) If there is more than one code number
assigned to your brand, try one code number at a time until
the right code number is found (the number that turns off the
Lexicon
C-5