Lexicon RV-8 User Manual page 103

SETUP
MAIN MENU SETUP
MODE ADJUST INPUTS
AUDIO CONTROLS SPEAKERS
TUNER PRESETS I/O CONFIG REAR PANEL CONFIG
DISPLAYS
SETUP
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
MAIN 7.1
SETUP I/O CONFIG AMP OUTPUTS
When set to Main 7.1, all of the amplifier outputs on the rear panel
will be configured for use in the Main Zone. Outputs 3 and 7 are
used for the rear speakers (Rear L/R).
MAIN 5.1 & Zone2 2.0
SETUP I/O CONFIG AMP OUTPUTS
Configures amplifier outputs 3 and 7 for use in Zone 2. Outputs 1,
2, 4, 5 and 6 will be configured for use in the Main Zone. The input
source selected for Zone 2 will be output on amplifier
outputs 3 and 7.
Note:
If the current speaker configuration is using rear
speakers, a warning message will appear alerting the
user to the fact that the rear speakers will be disabled
for the Main Zone when the 5.1 MAIN & Zone2 2.0
setting is chosen. Press the right menu button to con-
firm the change. Pressing any other button will
cancel the change.
3-50
I/O CONFIG
ANALOG INPUTS
AMP OUTPUTS
MAIN 7.1
MAIN 5.1 & Zone3 2.0
Configures amplifier outputs 3 and 7 for use in Zone 3. Outputs 1,
2, 4, 5 and 6 will be configured for use in the Main Zone. The input
source selected for Zone 3 will be output on amplifier
outputs 3 and 7.
MAIN 5.1 & ZONE2 2.0
AMP OUTPUTS
MAIN 7.1
MAIN 5.1 & ZONE2 2.0
MAIN 5.1 & ZONE3 2.0
SETUP I/O CONFIG AMP OUTPUTS
Note:
If the current speaker configuration is using rear
speakers, a warning message will appear alerting the
user to the fact that the rear speakers will be disabled
for the Main Zone when the 5.1 MAIN & Zone3 2.0
setting is chosen. Press the right menu button to
confirm the change. Pressing any other button will
cancel the change.
Lexicon
MAIN 5.1 & ZONE3 2.0