Lexicon RV-8 User Manual page 85

SETUP
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
CENTER
FULL, 30Hz to 120Hz, THX 80Hz, NONE
SETUP SPEAKERS CUSTOM SETUP
Opens the CENTER SPEAKER menu shown above, for selecting a
crossover point for the Main Zone speaker and audio output
connector labeled Center. When set to FULL, the RV-8 sends a full-
range audio output signal to this connector. Otherwise, the RV-8
activates a crossover point at the selected setting. Choose the
setting closest to the low-frequency rating of the associated speak-
er. When set to NONE, the RV-8 redirects center channel signals to
the Main Zone audio speaker and output connectors labeled Front
L/R.
3-32
SETUP
INPUTS
SPEAKERS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
CENTER
SPEAKER SETUP CUSTOM SETUP
CUSTOM SETUP CUSTOM SETUP FRONT L/R
CENTER
THX SETUP CENTER
SPEAKER DISTANCES SIDE L/R
LEVELS CALIBRATION REAR L/R
SUB
R SR RR
THX ULTRA2 SUB
40Hz 60Hz 60Hz
BGC
C
ASA
60Hz
M
L SL RL
SUB
40Hz 40Hz 60Hz 60Hz
Note:
When the CENTER parameter is set to NONE, center
channel signals will not be redirected to the Front L/R
outputs if the 5.1a BYPASS listening mode is activat-
ed. To redirect center channel signals, configure the
speaker setup included within the associated DVD-A
/SACD player.
CENTER SPEAKER
40Hz FULL
60Hz
60Hz 30Hz
60Hz 40Hz
60Hz 50Hz
40Hz 60Hz
OFF 70Hz
N/A 80Hz
APART THX 80Hz
90Hz
100Hz
110Hz
120Hz
NONE
Lexicon