Lexicon RV-8 User Manual page 84

RV-8
Custom Speaker Setups
(continued from page 3-30)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
SETUP SPEAKERS SPEAKER SETUP
Default
Parameter Setting
FRONT L/R 40Hz
CENTER 60Hz
SIDE L/R 60Hz
REAR L/R 60Hz
SUBWOOFER * 40Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
SETUP SPEAKER SETUP
INPUTS CUSTOM SETUP CUSTOM SETUP
SPEAKERS
SPEAKERS THX SETUP
I/O CONFIG SPEAKER DISTANCES
DISPLAYS LEVELS CALIBRATION
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
M
SUB
40Hz
Possible
Settings
FULL, 30 to 120Hz, THX 80Hz
FULL, 30 to 120Hz, THX 80Hz,
NONE
FULL, 30 to 120Hz, THX 80Hz,
NONE
FULL, 30 to 120Hz, THX 80Hz,
NONE
FULL, 30 to 120Hz, THX 80Hz,
NONE
ON, OFF
ON, OFF
TOGETHER, CLOSE, APART
CUSTOM SETUP
FRONT L/R FRONT L/R
CENTER
SIDE L/R
REAR L/R
SUB
R SR RR
THX ULTRA2 SUB
40Hz 60Hz 60Hz
BGC
C
ASA
60Hz
L SL RL
40Hz 60Hz 60Hz
FRONT L/R
SETUP SPEAKERS
Opens the FRONT L/R SPEAKERS menu shown above, for selecting
a crossover point for the Main Zone speaker and audio output
connectors labeled Front L/R. When set to FULL, the RV-8 sends a
full-range audio output signal to these connectors. Otherwise, the
RV-8 activates a crossover point at the selected setting. Choose the
setting closest to the low-frequency rating of the associated speak-
ers.
*
Note:
There is no speaker connector from the internal
amplifier available for the subwoofer. Use the preamp
connector instead.
FRONT L/R SPEAKERS
40Hz 40Hz FULL
60Hz 30Hz
60Hz 40Hz
60Hz 50Hz
40Hz 60Hz
OFF 70Hz
N/A 80Hz
APART THX 80Hz
90Hz
100Hz
110Hz
120Hz
FULL, 30Hz to 120Hz, THX 80Hz
CUSTOM SETUP FRONT L/R
SETUP
3-31