Seiting The Sleep Timer - Aiwa CX-N4000 U Operating Instructions Manual

2 W
DOWN
UP WI
b
SElllNG THE SLEEP TIMER
The sleep timer automatically turns the unit off after the specified
time passes.
1
2
Press the SLEEP button.
SLEEP @), @ and 60 @ are displayed.
SLEEP @ goes out in 4
seconds, and the sleep timer starts to
work. The power is automatically turned off after 60 minutes.
If you wish to change this time, go to step 2 before SLEEP @
goes out.
Press the ++ DOWN or m- UP button to specify
the time until the power is turned off.
Each time the button is pressed, the time changes between 10
and 240 minutes in 10-minute steps.
The specified time ~ is displayed.
To check the time remaining until the power is turned off
Press the SLEEP button once. The remaining time is displayed for
4 seconds.
To cancel the sleep timer mode
Press the SLEEP button twice so that SLEEP in the display goes
out.
66