Scan Mode Set; Tray Lock - JVC DR-M10S Instructions Manual

Scan Mode Set

You can select the scan mode from two modes: Interlaced
scan mode which is used in the conventional TV system,
and Progressive scan mode which enables reproduction
of higher-quality images. For details, refer to
"GLOSSARY" ( pg. 108).
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
ATTENTION:
Your TV needs to be compatible with Progressive.
A
Set the scan mode.
Press PROGRESSIVE SCAN for 3 or more seconds.
Video output indicator (
Progressive scan mode has been established. (
Each press of PROGRESSIVE SCAN for 3 or more seconds
switches the scan mode.
NOTES:
Interlaced scan mode is the setting at your purchase.
Interlaced scan mode might be suitable depending on video
material.
Scan mode cannot be set while menu screen is displayed.
) lights on the front display panel if
pg. 15)

Tray Lock

You can lock the disc tray to prohibit the unwanted disc
ejection by children.
Turn off the unit.
A
Lock the disc tray.
While the unit is turned off, press and hold 8, then press
x on the unit. "LOCK" appears on the front display
panel.
If you try to eject the discs, "LOCK" appears and indicates that
tray is locked.
To unlock tray
While the unit is turned off, press and hold 8, then press
x on the unit. "UNLOCK" appears on the display panel.
103
EN