Scan Mode Set - JVC DR-M1SLE Instructions Manual

108

Scan Mode Set

You can select the scan mode from two modes: Interlaced
scan mode which is used in the conventional TV system,
and Progressive scan mode which enables reproduction
of higher-quality images. For details, refer to
"GLOSSARY" ( pg. 113).
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
ATTENTION:
Your TV needs to be compatible with PAL Progressive.
SUBSIDIARY SETTINGS (cont.)
A
Set the scan mode.
Press PROGRESSIVE SCAN for 2 or more seconds.
● Video output indicator (
Progressive scan mode has been established. (
● Each press of PROGRESSIVE SCAN for 2 or more seconds
switches the scan mode.
NOTES:
● When the progressive mode is set, be sure to set "L-1
OUTPUT" to "COMPONENT". (
L-1 Input Setting (L-1 OUTPUT and L-1 INPUT)") Progressive
scan is output only from COMPONENT VIDEO OUT
connector.
● Interlaced scan mode is the setting at your purchase.
● When Progressive scan mode is engaged, no video signal is
output from S-VIDEO OUT connector and L-1 IN/OUT
connector.
● Interlaced scan mode might be suitable depending on video
material.
● Scan mode cannot be set while menu screen is displayed.
) lights on the front display panel if
pg. 14)
pg. 84, "L-1 Output and