Table of Contents
Advertisement
106
EN
ON-SCREEN MESSAGES
MEMORY IS FULL
NOTHING MORE CAN BE REGISTERED IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE INFORMATION,
YOU CAN THEN REGISTER ADDITIONAL INFORMATION
AVAILABLE MEMORY IS LOW
SOON YOU WILL NO LONGER BE ABLE
TO REGISTER INFORMATION IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE INFORMATION,
YOU CAN THEN REGISTER ADDITIONAL INFORMATION
DISC NOT REGISTERED IN THE LIBRARY
REGISTER DISC?
INSERT DISC #XXXX
CAN NOT RECORD OR MAKE PLAY LIST
DELETE UNWANTED TITLES
SET CLOCK BEFORE TIMER PROGRAMING
PROGRAM FULL
DELETE UNWANTED TIMER PROGRAM
CAN NOT SET DISC TIMER PROGRAMING WITH THIS DISC
PREPARE A FORMATTED DISC AS DESCRIBED BELOW
DVD-RAM
DVD-RW (VR MODE)
NO DISC INSERTED
DISC NOT RECORDABLE
INSERT RECORDABLE DISC
PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY
GUIDE PROGRAM IS NOT SET
SELECT CHANNEL YOU WANT TO RECORD
CAN NOT SET VCR PLUS+ TIMER PROGRAMING DURING
TIMER RECORDING OR INSTANT TIMER RECORDING
CANCEL TIMER RECORDING OR
INSTANT TIMER RECORDING, THEN
ENTER THE PLUSCODE AGAIN
REGION CODE ERROR
CHECK DISC
UNREADABLE DISC
CHECK DISC
COULD NOT FORMAT THE DISC
CHECK THE DISC
COULD NOT FINALIZE THE DISC
CHECK THE DISC
COULD NOT CANCEL DISC FINALIZATION
CHECK THE DISC
MESSAGE
TROUBLESHOOTING (cont.)
DESCRIPTION
The memory is full for registration for the Navigation system. The
recording cannot be started even though the capacity for the
recording is enough. (
pg. 77)
The remaining capacity of the memory is not enough for
registration for the Navigation system. The recording cannot be
started even though the capacity for the recording is enough.
(
pg. 77)
A disc that is not registered in the library has been inserted.
Register the disc as necessary. (
Appears when a title that has been selected in the library is not
contained in the loaded disc. (
Recording and/or editing cannot be performed with a loaded
DVD-RAM disc.
The number of titles exceeds 99.
The number of play lists exceeds 999.
To set the timer program, the clock must be set in advance.
(
pg. 24)
You can program this unit to timer-record as many as 8
programs. To program more, you need to cancel a timer program
already set. (
pg. 69)
On-Disc Timer Programing has been attempted when a disc that
is not compatible with the function is loaded. (
On-Disc Timer Programing has been attempted when a disc is
not loaded, or loaded upside down. (
When a playback-only disc or a finalized disc is loaded, 7 has
been pressed. (
pg. 8, 102)
An invalid PlusCode number has been input. (
To set the timer program using the VCR Plus+ system, the Guide
Channel number must be set in advance. (
Appears when you tried to input a PlusCode number during
timer recording or instant timer recording.
A disc loaded cannot be played back on this unit since the
region number of the disc does not match that of the unit.
(
pg. 8)
When an incompatible disc is loaded, 4 has been pressed.
(
pg. 8)
Formatting is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (
Finalizing is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (
Cancelling disc finalization is not complete since the disc may
be dirty or damaged. Take out the disc, clean it and retry.
(
pg. 11, 102)
pg. 83)
pg. 82)
pg. 66)
pg. 11, 66)
pg. 60)
pg. 62)
pg. 11, 101)
pg. 11, 102)
Advertisement
Table of Contents
