Getting Started - Interphase Sonar Engine SE-200 Operation Manual

Getting Started

Note: Before starting, make sure system software is set to
the proper model (i.e. SE-200A, SE-200B or SE-200C. See
page 18 for details.
ON/OFF - PWR Button.
Press the red "PWR" button located at the upper right of the
remote keypad (or integral keypad on the Interphase VGA
display) to turn the SE-200 sonar engine box on. The green
LED light on the left end-panel on the red box should light.
To turn the SE-200 sonar engine box off, press and hold down
the PWR button for approximately 3 seconds.
Soft Keys and Screen Menus
The five numbered buttons at the bottom of the remote keypad
(or below the display on the Interphase VGA unit) are called
softkeys (because their use is determined by the menu choices
and the SE-200's software). Whenever one of the softkey
buttons are pressed, or when making adjustments (like
changing the color mode, brightness, gain or range) a screen
menu will appear at the bottom of the display. For example,
the sketch at right shows the ALARM function being selected.
The remote keypad's softkeys have numbers just above them
that relate to the numbers on the display menus. When using
the Interphase VGA display, the softkey buttons are directly
below the display menu.
For simplification in this manual, menu choices are shown
with a finger pointing to a menu icon (like the alarm icon at
right). This actually means that the softkey button associated
with this icon is being pushed.
Press the EXIT icon to exit or the menu will disappear after
several seconds..
"NAV" Button
This large button (located at center of keypad) is used to make
adjustments to increase or decrease something - like the
GAIN, RANGE, etc. In several menus you can also use the
softkeys relating to the
to make the adjustment.
symbols on the NAV button are used to select an
The
item in the menu. For example, when the GAIN menu is
displayed, the symbol on the NAV key will select the
DOWN gain to adjust, while pressing the
the SCAN gain to adjust. See RANGE/GAIN on pages 9-10
for details.
symbol that appears in the menu
symbol will select
Depth 13.2 Ft 25
12.5
25
EXIT
Row of Softkey buttons on bottom of keypad
or below the Interphase VGA display are
related to the symbols or words at the bottom
of the display
NAV Button
5
50
.