Connecting Displays - Interphase Sonar Engine SE-200 Operation Manual

Connecting Displays

The diagrams below show several different possible display configurations. Note that VGA, video and Interphase
VGA displays with integral keypads can all be connected at the same time. In general, common video and VGA
cables and splitters can be used when fitting multiple stations, however some loss of video or VGA signal can occur
with long runs and/or multiple displays. Several different displays (both VGA and video) have been tested to cable
lengths of 200+ feet, but an amplified splitter can provide even further cable lengths and improved quality with multi-
ple displays. Amplified splitter information is available from Interphase Technical Support at (831) 477-4944, ext
16 or with the SE-200 information on our website at www.interphase-tech.com
SE-200 SONAR ENGINE—SINGLE STATION CONNECTIONS (VGA OR VIDEO)
30'
TRANSDUCER
(S)
SE-200 SONAR ENGINE—MULTI-STATION CONNECTIONS (VGA OR VIDEO)
30'
TRANSDUCER(S)
KEYPAD
KEYPAD CABLE
VGA OR VIDEO CABLE
KEYPAD SPLITTER
KEYPAD CABLE
VIDEO SPLITTER
VGA CABLE
VIDEO CABLE
VGA SPLITTER
*Visit our website or contact your local dealer or Interphase more interconnection information
22
FLAT PANEL VGA OR VIDEO
MULTIFUNCTION DISPLAY
REMOTE KEYPAS
VIDEO MULTIFUNCTION DISPLAYS
VGA FLAT PANEL DISPLAYS