Screen Displays; Vertical; Horizontal - Interphase Sonar Engine SE-200 Operation Manual

Current Depth Below
Boat
Depth 13.2 Ft
25
Depth Scale
12.5
25
Current Depth Below
Boat
75
50
25
Targets (Echos)
Forward Range
50
Forward Range
Position of Boat
6

Screen Displays

The SE-200 has four basic display modes which can be
accessed directly by pressing one of the four buttons with
the display's name. The following paragraphs give a
brief description of each of these display modes. More
detailed information on how to interpret and make
adjustments in these displays can be found in pages 13 to
16 Interpreting your SE-200's Display.
Vertical Scan
Press the button labeled "VERT" to view a full screen
forward looking vertical scan display. In this mode, the
SE-200 scans a 90 degree sector from the surface ahead
to the bottom directly below. The resulting display shows
the bottom and objects directly in front of the vessel.
The display should look similar to the unit shown at left.
The boat icon at the top left of the display represents the
position of the vessel. The horizontal line with the scale
across the top of the display represents the surface of the
water and the vertical scale represents the depth below the
vessel. The current depth directly below the boat is
shown at the top left of the display - just in front of the
boat icon.
The current forward range is shown by the digital number
at the far top right of the display. This number will
change as different ranges are selected. Adjust RANGE/
GAIN (see pages 9 –10) to optimize the picture.
Horizontal Scan
If your system is an SE-200B or SE-200C (which
includes the horizontal capability), press the button
labeled "HORIZ" to view a full screen forward looking
horizontal scan display. The display should look similar
to the unit shown at left. The boat icon at the bottom
center of the display represents the position of the vessel.
The range rings indicate the forward distance from the
vessel. The current depth directly below the boat is
shown at the top left of the display .
The current forward range is shown by the digital number
at the far top right of the display. This number will
change as different ranges are selected. Adjust RANGE/
GAIN (see pages 9-10) to optimize the picture.