Getting Started - Interphase Vista Operation Manual

Getting Started

Turning the VISTA On
To turn the VISTA on, press the Power/ Backlight Key
located on the lower right corner of the unit one time. The
unit should sound a beep and the display should be
Press the left button until the Main
illuminated.
Menu appears as shown at below right.
The Main Menu
From the Main Menu you can see that the VISTA has four
basic display modes or Views. They include:
FWD (Full Screen Forward View)
DOWN (Full Screen (Conventional Downlooking View)
DATA (Split Screen View with Large Digit Depth on
left and Forward scanning display on right.)
SETUP (Full Screen Set-Up View)
Each of these views can be easily selected by pressing the
button below the desired menu selection as shown above. To
return to the Main Menu just press the left button labeled
MENU. When first turned on, the VISTA's internal
memory automatically sets the starting view to the last one
you used before turning off the power.
FORWARD DISTANCE
1/2 Power Cone Angle
Vista can typically detect targets within
this area
vistman1
page 17
Interphase Vista
VISTA'S MAIN MENU
250
20 degrees
52
17
Control
Knob
500
210
Tuesday, July 06, 1999 10:15