Table of Contents
Advertisement
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is
automatically calculated by the built-in timer. The timer displays lamp hours used in
Normal mode, plus equivalent Economic mode hours. Equivalent Economic
mode hours are calculated as follows:
1 lamp hour (in Normal mode) = 1.33 lamp hours (in Economic mode)
See
"Setting Lamp mode as Economic"
To obtain the lamp hour information:
1.
Press MENU/EXIT and then press
Advanced menu is highlighted.
2.
Press
Settings page displays.
3.
You will see the Equivalent lamp hour information displaying on the menu.
4.
To leave the menu, press MENU/EXIT.
You can also get the lamp hour information on the INFORMATION menu.
Extending lamp life
The projection lamp is a consumable item. To keep the lamp life as long as
possible, you can do the following settings via the OSD menu.
Setting Lamp mode as Economic
Using Economic mode reduces system noise and power consumption by 20%. If
the Economic mode is selected, the light output will be reduced and result in
darker projected pictures.
Setting the projector in Economic mode also extends the lamp operation life. To
set Economic mode, go into the SYSTEM SETUP: Advanced > Lamp Settings >
Lamp mode menu and press
Setting Auto Power Off
This function allows the projector to turn off automatically if no input source is
detected after a set period of time to prevent unnecessary waste of lamp life.
To set Auto Power Off, go into the SYSTEM SETUP: Basic > Auto Power Off
menu and press
increments. If the preset time lengths are not suitable for your presentation, select
Disable. The projector will not automatically shut down in a certain time period.
to highlight Lamp Settings and press MODE/ENTER. The Lamp
/
/
. The time period can be set from 5 to 30 minutes in 5-minute
below for more information on Economic mode.
/
until the SYSTEM SETUP:
.
Maintenance
45
Hide quick links:
Advertisement
Table of Contents
