Optimizing The Image - InFocus IN102 Reference Manual

Optimizing the image

Selecting a picture mode
The projector is preset with several
predefined picture modes so that you can
choose one to suit your operating
environment and input signal picture type.
To select an operation mode that suits your
need, you can follow one of the following
steps.
• Press MODE/ENTER on the remote
control or projector repeatedly until your desired mode is selected.
• Go to the PICTURE > Preset Mode menu and press
mode.
Setting the User mode
There are two user-definable modes if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the User) as
a starting point and customize the settings.
1. Press MENU/EXIT to open the On-Screen Display (OSD) menu.
2. Go to the PICTURE > Preset Mode menu.
3. Press
4. Press
/ . See
5. When all settings have been done, highlight Save Settings and press MODE/
ENTER to store the settings.
6. The confirmation message 'Setting Saved' displays.
/ to select User.
to select a sub-menu item to be changed and adjust the value with
"Fine-tuning the image quality in user modes"
a e r A
e m a N l e d o M
/ O G O L
m m 0 . 5 4
/ to select a desired
below for details.
Operation 29