InFocus IN102 Reference Manual page 40

FUNCTION
Preset Mode
Brightness
Contrast
Color
Tint
Sharpness
Brilliant
Color
Color
Temperature
3D Color
Management
Save
Settings
Quick Auto
Search
40 Operation
DESCRIPTION
Pre-defined picture modes are provided so you can optimize
your projector image set-up to suit your program type. See
"Selecting a picture mode" on page 29
Adjusts the brightness of the image. See
on page 30 for details.
Adjusts the degree of difference between dark and light in the
image. See "Adjusting Contrast" on page 30
Adjusts the color saturation level -- the amount of each color in
a video image. See
Adjusts the red and green color tones of the image. See
"Adjusting Tint" on page 31
The function is only available when Video or S-Video with NTSC
system is selected.
Adjusts the image to make it look sharper or softer. See
"Adjusting Sharpness" on page 31
Adjusts white peaking while maintaining correct color
presentation. See "Adjusting Brilliant Color" on page 31
details.
See "Selecting a Color Temperature" on page 31
See "3D Color Management" on page 32
Saves the settings made for User mode.
See "Switching input signal" on page 24
"Adjusting Color" on page 31
for details.
for details.
for details.
"Adjusting Brightness"
for details.
for details.
for
for details.
for details.
for details.