InFocus IN102 Reference Manual page 43

FUNCTION
VGA Out
Lamp
Settings
Security
Settings
Reset All
Settings
Current
System
Status
DESCRIPTION
Selecting On enables the function. The projector can output a
VGA signal when it is in standby mode and the D-SUB IN and
D-SUB OUT sockets are correctly connected to devices. See
"Connecting a monitor" on page 15
connection.
Enabling this function slightly increases the standby power
consumption.
Lamp mode
See "Setting Lamp mode as Economic" on page 45
Reset lamp timer
See "Resetting the lamp timer" on page 49
Equivalent lamp hour
ee "Getting to know the lamp hour" on page 45
S
on how the total lamp hour is calculated.
Change password
You will be asked to enter the current password before
changing to a new one.
Power on lock
See "Utilizing the password function" on page 22
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User, Language, Projector Position, High Altitude Mode,
Security Settings.
Source
Shows the current signal source.
Preset Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
for how to make the
for details.
for details.
for details
for details.
Operation 43