Connecting A Component Video Source Device - InFocus IN102 Reference Manual

Connecting a Component video source device

Examine your video source device to determine if it has a set of unused
Component video output sockets available:
• If so, you can continue with this procedure.
• If not, you will need to reassess which method you can use to connect to the
device.
To connect the projector to a Component video source device:
1. Take a Component video to VGA (D-Sub) adaptor cable and connect the end
with 3 RCA type connectors to the Component video output sockets of the
video source device. Match the color of the plugs to the color of the sockets;
green to green, blue to blue, and red to red.
2. Connect the other end of the Component video to VGA (D-Sub) adaptor cable
(with a D-Sub type connector) to the COMPUTER IN1/COMPUTER IN2
socket on the projector.
3. If you wish to make use of the projector (mixed mono) speaker in your
presentations, take a suitable audio cable and connect one end of the cable to
the audio output socket of the device, and the other end to the AUDIO IN
socket of the projector.
4. If you wish, you can use another suitable audio cable and connect one end of
the cable to the AUDIO OUT jack of the projector, and the other end to your
external speakers (not supplied).
Once connected, the audio can be controlled by the projector On-Screen
Display (OSD) menus. See
The built-in speaker will be muted when the AUDIO OUT jack is connected.
The final connection path should be like that shown in the following diagram:
• The projector is only capable of playing mixed mono audio, even if a stereo audio input is
connected. See
• If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the video source device is turned on and
operating correctly. Also check that the signal cables have been connected correctly.
"Adjusting the sound" on page 35
AV device
RS-232
Component video
to VGA (D-Sub)
adaptor cable
Audio cable
"Connecting audio" on page 16
MONITOR OUT COMPUTER IN1 COMPUTER IN2
for details.
for details.
Speakers
VIDEO S -VIDEO AUDIO IN AUDIO OUT
Audio cable
Connection 17