Lamp Information - InFocus X17 Reference Manual

Hide thumbs Also See for X17:
Table of Contents

Advertisement

Lamp information

Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is
automatically calculated by the built-in timer. The method of calculating the
equivalent lamp hour is as follows:
Total (equivalent) lamp hour
= 1 (hours used in Economic mode) + 4/3 (hours used in Normal mode)
See
"Setting Lamp mode as Economic"
The lamp hour in Economic mode is calculated as 3/4 of that in Normal mode.
That is, using the projector in Economic mode helps to extend the lamp hour by 1/
3.
To obtain the lamp hour information:
1.
Press MENU/EXIT and then press
Advanced menu is highlighted.
2.
Press
Settings page displays.
3.
You will see the Equivalent lamp hour information displaying on the menu.
4.
To leave the menu, press MENU/EXIT.
You can also get the lamp hour information on the INFORMATION menu.
Extending lamp life
The projection lamp is a consumable item that normally can last up to 3000-4000
hours with proper usage. To keep the lamp life as long as possible, you can do the
following settings via the OSD menu.
Setting Lamp mode as Economic
Using Economic mode reduces system noise and power consumption by 20%. If
the Economic mode is selected, the light output will be reduced and result in
darker projected pictures.
Setting the projector in Economic mode also extends the lamp operation life. To
set Economic mode, go into the SYSTEM SETUP: Advanced > Lamp Settings >
Lamp mode menu and press
Setting Auto Power Off
This function allows the projector to turn off automatically if no input source is
detected after a set period of time to prevent unnecessary waste of lamp life.
To set Auto Power Off, go into the SYSTEM SETUP: Basic > Auto Power Off
menu and press
increments. If the preset time lengths are not suitable for your presentation, select
Disable. The projector will not automatically shut down in a certain time period.
44
Maintenance
to highlight Lamp Settings and press MODE/ENTER. The Lamp
/
/
. The time period can be set from 5 to 30 minutes in 5-minute
below for more information on Economic mode.
/
until the SYSTEM SETUP:
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

X16

Table of Contents