I Memory Bank Setting - Icom IC-2200H Instruction Manual

5
MEMORY OPERATION

I Memory bank setting

q Push [M/CALL
PRIO
lect the desired memory channel via [DIAL].
w Push [SET
LOCK
e Push [SET] or [MONI] several times until "BAK" appears.
• "– –" indication blinks as follows.
r Rotate [DIAL] to select the desired bank to be set.
t Push any key other than [SET] or [MONI] to set the chan-
nel into the bank and return to regular memory condition.
y Repeat steps q to t to set another memory channel into
the same or another bank.
33
] to select memory mode, then se-
] enter the set mode.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET TONE
MONI LOW
[DIAL]
BANK/OPTION
MW
[Y]/[Z]
PRIO SCAN
M/CALL V/ MHz
PRIO SCAN
M/CALL
V/ MHz
z Push [MR/CALL] then select the desired
memory channel via [Y Y ]/[Z Z ] or keypad.
x Push [
B(D-OFF)] to enter set mode.
SET
c Push [
B(D-OFF)] or [
SET
several times until "BAK" appears.
v Push [Y Y ] or [Z Z ] to select the desired bank
to be set.
b Push [
A(MW)] to set the channel into
CLR
the bank and exit set mode.
n Repeat steps z to b to set an another
memory channel into the same or another
bank.
C(T-OFF)]
ENT