Datamax E-Class E-4304 Operator's Manual page 39

Problem
Description
Label Alignment is
incorrect. Pressing
FEED successively
results in a short
label length, 1-inch.
Label Alignment is
incorrect. Pressing
FEED successively
results in a label
length longer than
actual, 1 inch.
E-4203/E-4204/E-4304
Possible
Cause
Label Alignment
Length is not
correct. The
default Label
Alignment
Length is 1.00",
and will result in
this behavior
when any larger
label length is
used without
setting the
appropriate
length
Label Alignment
Length is not
correct. The
default Label
Alignment
Length is 1.00",
and will result in
this behavior
when any larger
label length is
used without
setting the
appropriate
length
Solution
Ø Set Label Alignment to AUTO,
press and hold FEED till paper
moves for automatic Label
Alignment Length
measurement.
~OR~
Ø Measure Label Alignment
Length, use Menu Setup to set
new length, ensure desired
length has been set.
Ø Set Label Alignment to AUTO,
press and hold FEED till paper
moves for automatic Label
Alignment Length
measurement.
~OR~
Ø
Measure Label Alignment
Length, use Menu Setup to set
new length, ensure desired
length has been set.
29