Datamax E-Class E-4304 Operator's Manual page 31

17) INTERNAL MODULE
Sets the number of 4K Byte blocks
allocated for the internal RAM
module.
Possible Values:
0 – 255; default = *128
19) ALIGNMENT LENGTH
section 4.5 for more information)
Leading edge to leading edge
distance of two successive labels.
Must be set when 'LABEL
ALIGNMENT' is set to Yes.
Possible Values:
0 – 999; default =100*
Units: .01 inch
* = Default Setting
All of the menu items listed in the previous tables are stored in non-volatile memory.
E-4203/E-4204/E-4304
18) LABEL ALIGNMENT
4.5 for more information)
Sets Label Alignment Method.
Possible Values:
YES
AUTO (printer will automatically
* NO
20) STOP LOCATION
(see
Sets convenient stop locations for
different printer configurations.
Possible Values:
*HOST (printer uses host values of SOP
PEEL
CUT
COVER (sets stop location at the tear plate)
NONE (printer uses normal start location
(printer uses 'ALIGNMENT
LENGTH' or host sent value)
determine label length)
(Label Alignment disabled)
and Present Distance)
(sets stop location just behind the
peel bar)
(sets stop location at the cutter
blade)
and ignores host commands)
(see section
21