Installing Memory; Main Memory Modules - HP Kayak XA05 Supplementary Manual

Pc workstation upgrade and configuration guide

Hide thumbs Also See for Kayak XA05:

Table of Contents

CAUTION

Installing Memory

If you need more main memory to run your application software, you

can install up to 768 MB of memory in three 100 MHz DIMM slots.

Main memory upgrades are available in single non-buffered 32 MB,

64 MB and 128 MB or 256 MB SDRAM memory modules.

Static electricity can damage electronic components. Turn off

all equipment. Do not let your clothes touch the accessory.

To equalize the static electricity, rest the accessory bag on top

of the power supply while you are removing the accessory from

the bag. Handle the accessory as little as possible and with care.

To install a main memory module:

1 Disconnect the computer's power cord and any LAN or

telecommunications cable.

2 Remove the computer's cover (refer to page 3).

3 Press the retaining buttons on each side of the HP UltraFlow airflow

guide and remove it from the PC Workstation's case.

1 How to Install Accessories In Your Desktop PC Workstation

Lift the HP UtraFlow

airflow guide forwards

and upwards.

Installing Memory

English

Table of Contents

Kayak xa series