Replacing The Cover - HP Kayak XA05 Supplementary Manual

1 How to Install Accessories In Your Desktop PC Workstation
Removing and Replacing the Cover

Replacing the Cover

1 Ensure that you have installed all your accessories and that all
internal cables are properly connected and safely routed.
2 Lower the cover completely onto the computer (aligning the back of
the cover with the inner back edge of the PC Workstation's case),
and firmly slide it backwards into place. Ensure that the retaining
latches click into position.
Align the back of the cover
with the inner back edge of
the PC Workstation's case.
Ensure that the retaining
latches on either side of
the PC Workstation's
case click into position.
3 If required, lock the cover using the key provided.
4 Reconnect all the power cables.
4 English