Installing A Drive In A Front-Access Shelf - HP Kayak XA05 Supplementary Manual

Pc workstation upgrade and configuration guide

Hide thumbs Also See for Kayak XA05:

Table of Contents

Before Installing an

IDE Device

Before Installing a

SCSI Device

Installing a Drive in a Front-Access Shelf

These instructions explain how to install a drive (such as a floppy disk

drive, CD-ROM drive, CD-RW drive, or tape drive) in one of the front-

access drive shelves. You should also refer to the manual supplied with

the drive for any additional installation instructions.

Refer to the drive's installation guide to see if you must set jumpers or if

there is a special installation procedure to follow.

If you are installing a SCSI device, refer to "Before Installing a SCSI Hard

Disk" on page 11, before using the following instructions.

1 Disconnect the computer's power cord and any LAN or

telecommunications cable.

2 Remove the computer's cover (refer to page 3).

3 Remove the metal filler plate from the front of the PC Workstation's

case.

1 How to Install Accessories In Your Desktop PC Workstation

Installing Mass Storage Devices

Remove the

metal filler plate.

English

Table of Contents

Kayak xa series