Removing And Replacing The Cover; Removing The Cover - HP Kayak XA05 Supplementary Manual

WARNING

Removing and Replacing the Cover

For your safety, never remove the PC Workstation's cover without first
removing the power cord from the power outlet, and any connection to
a telecommunications network. Always replace the cover on the
PC Workstation before switching it on again.

Removing the Cover

1 Switch off the display and computer.
2 Disconnect all power cables and any LAN or telecommunications
cable.
3 If necessary, unlock the cover using the key on the back panel, and
remove any floppy diskettes from the floppy drive.
4 Push the two latches on the sides of the computer upwards.
5 Grasp the cover on both sides of the computer, and carefully slide it
forwards and off the computer.
1 How to Install Accessories In Your Desktop PC Workstation
Removing and Replacing the Cover
English 3