geron.bk : geron-2.fb4 Page 23 Friday, April 24, 1998 5:30 PM
WARNING
Removing and Replacing the Cover
For your safety, never remove the PC Workstation's cover without first
removing the power cord from the power outlet, and any connection to
a telecommunications network. Always replace the cover on the
PC Workstation before switching it on again.
Removing the Cover
1 Switch off the display and computer.
2 Disconnect all power cables and any telecommunications cables.
3 If necessary, unlock the cover using the key on the back panel, and
remove any floppy diskettes from the floppy drive.
4 Push the two latches on the sides of the computer upwards.
5 Grasp the cover on both sides of the computer, and carefully slide it
forwards and off the computer.
2 How to Install Accessories In Your HP Kayak PC Workstation
Removing and Replacing the Cover
English
23