HP Kayak XA Installation Manual page 30

Multimedia sound kit
Hide thumbs Also See for Kayak XA:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
1 Installing Your Multimedia Sound Kit
Sound Board Specifications
Built-In Interfaces
Microphone Input
Sound Board Codec
Settings
(all by software)
Nonchangeable settings:
22 English
MIDI interface for connection to external MIDI devices
Sound Blaster and MPU-401 UART mode compatible
Input buffer: 64-byte FIFO
Telephone Answering Device (TAD) interface for connection to a
voice modem board
AUX In interface for connection to MPEG (for audio
compression/decompression), TV tuner, or other similar auxiliary
boards
Sensitivity: 30 mVpp to 200 mVpp
High-performance, 16-bit stereo ADC/DAC
Over-sampling Delta-Sigma technology
80-dB maximum dynamic range
Audio I/O address selection: 220H, 240H
MIDI I/O address selection: 300H or 330H
Interrupt (IRQ) selection: 5, 9, 10, or 11
8-bit ("High") DMA selection: channel 0, 1 or 3
Wave address: 534H, 608H, E84H, F44H
Game Port I/O address range is 200H to 207H
FM Music synthesizer I/O address range is 388H to 38BH.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kayak xu700

Table of Contents